Golden Touch Painting & Decorating and Glitter Wallpaper stockist Perth 3.22

** Glitter Wall Covering **


Placing your order -

The glitter wall covering that we stock is very different to normal wallpaper. It comes 137cm wide, compared to a normal roll of wallpaper which is 52cm wide. It does not come in a roll and is cut to order based on length, which is calculated by the measurements you provide when placing your order.

Due to our glitter wall coverings being cut to order, we are unable to accept returns. Please ensure that you provide us with the correct measurements when placing your order.

To place an order, please firstly decide on which colour you would like, we are happy to send you free samples to help make that decision. Once you have chosen the desired colour, send us the wall dimensions and we will calculate how many metres of material are required and provide you with a quote.

When you receive your order, please inspect the full length for any damage. Credits will only be given on damaged stock.



Fitting instructions -

The glitter wall covering has a fabric backing and is quite heavy. We strongly recommend that you use a professional wall paper hanger who has experience with fabric backed wall coverings.

We also recommend that you use only the adhesive we supply. If you do not, then we cannot accept responsibility for any resulting problems.

The application method used is 'cut & splice'
Evenly paste the wall - not the material - and then apply the material. The glitter should be hung the same way it comes off the roll to avoid shading differences. You must ensure that no paste gets on the face of the glitter at any time as you will not be able to remove it and it will affect the presentation.

The material does have some movement which will assist you in moving it around before making any cuts whilst again ensuring that no paste gets on the front of the material. For the cut & splice, overlap the material and make a cut through the middle. As the material is so heavy, we recommend using 2 knives for every cut. Once you have made the cut, you can then remove any excess material which should result in a seamless joint.

Please note that these instructions are based on William’s 16 years’ personal experience in paper hanging, and other professionals may have their own technique and/or method.